| Power Supply | 100-240 V AC/DC 50/60 Hz |
| Accuracy | 0.2% FS |
| Power Source | Electric |
| Display | LCD |
| Operating Pressure | 1.6 MPa / 16 Bar |
We are engaged in developing a comprehensive range of Flow Totaliser indicators. To display flow rate and total flow. They are known for their proven quality as they conform to the best standards in the industry and are available at the best prices.
| Material | Mild Steel |
| Temperature Range | Up to 1500 Deg C |
| Power Supply | 230 V AC |
| Pressure | Up to 100 Bar |
| Power Supply | 110-230 V AC 50 Hz |
| Response Time | 2 Seconds |
| Ingress Protection | IP65 |
| Flow Velocity Range | 0.3 m/sec to 12 m/sec |
| Callbration Velodty at Factory | 0.3 M/sec to 5M/sec |
| Maximum Viscosity of Media Allowed | 200 CP |
| Power Supply of field Coils | Plused Dc |
| Temperature | 27 Degree C+/- 2 Degree C |
| Repeatability | +/- 0.2 % of Reading |
| Ambient Temperature | 0-50 Degree C |
| Temperature Drift | +/- 0.015 % Per Deg C. MAX |
| Signal Out Put | 4-20 mA Max 600 |
| Media Conductivity | Minimum 5 cm |
| Type | Integral Mounted (Standard) Remote Mount (On Demand) |
| Display | Flow rate 4 Digit Led (LPM, LPH, M3, HR Totalised Quantity 9 Digit Led |
| Reference Conditions | Power Supply Nominal |
| Maximum Pressure | From DN 10 to DN 80 – PN 40 From DN 100 to DN 200 – PN 16 From DN 250 to DN 350 – PN 40 |
| Accuracy | +/- 0.5 % of reading (at Ref. conditions) Between 100% to 10% of callbrated range 0.75% of reading for flow rate between 10% to 5% |
| Humldity | 99% of R.H.Max Nom. Condensing |
| Housing Material | Alumillum die. Cast ABS (For HDPE/PVC Model |
| Cable Entries (PG9) | 2 No. For Integral Amplifier |
| Lining Thickness | Rubber 2.5 to 6 mm Teflon 2.5 to 6 mm |
| Temperature Range | -50-200 Degree C |
| Material | Stainless Steel |
| Display | LCD Digital |
| Protection grade | IP67 |
